2020 Sany 56M Concrete Pump Truck with Mercedes Benz Chassis for High-Rise Construction

Here is a detailed product introduction for the 2020 Sany SYM5449THBE 56m Concrete Pump Truck mounted on a Mercedes-Benz Chassis.

This specification sheet is compiled based on technical data from Sany Heavy Industry and corresponding chassis records.

The 2020 Sany SYM5449THBE 560C-8A is a high-end concrete placing equipment that combines Sany’s world-leading hydraulic technology with the reliability of a German Mercedes-Benz Chassis. Designed for large-scale infrastructure projects and high-rise building construction, this 56-meter model offers the optimum balance between reach and pumping efficiency.

• Chassis Model: Mercedes-Benz Arocs 4143 8x4

• Year of Manufacture: 2020

• Engine Model: Mercedes-Benz OM470LA.5-54

• Engine Type: V6 Diesel Engine

• Displacement: 10.677 Liters

• Power Output: 315 kW (approx. 428 hp)

• Emission Standard: Euro V / National V

• Fuel Tank Capacity: 390 Liters

• Drive Configuration: 8x4 (Twin-Steer Front Axles)

• Tires: Front: 385/65R22.5; Rear: 315/80R22.5 (or 12R22.5)

• Suspension: Spring Suspension

• Max. Vertical Reach: 56 meters

• Number of Boom Sections: 6 sections (Roll-fold design for quick setup and flexibility)

• Boom Articulation Angles: 89°/180°/180°/240°/210°/110°

• Outriggers: X-outrigger configuration (stabilized support for 4-axle chassis)

• Theoretical Output (High/Low): 180 / 125 m³/h

• Concrete Pressure (High/Low): 8.3 / 12 MPa

• Pumping Frequency (High/Low): 29 / 19 strokes/min

• Cylinder Diameter x Stroke: 260 mm x 2100 mm

• Hydraulic System: Open-loop system with Sany’s patented hydraulic technology (Rosenboom/Sany), ensuring high suction efficiency.

• Overall Dimensions (L x W x H): ~13,860 mm x 2,550 mm x 4,000 mm

• Total Weight (GVW): 44,000 kg

• Axle Load Distribution: 9,000 kg / 9,000 kg / 13,000 kg / 13,000 kg

• Remote Control: Wired and radio remote controls (typically HBC or Sany brand) for safe operation.

• Service Life: Being a 2020 model, this machine represents a late-model used unit with modern electronic control systems, often offering good value retention.

• Application: Suitable for pouring high-rise floor slabs, bridges, tunnels, and mass concrete foundations.

Note: Specifications may vary slightly depending on the specific sub-model (e.g., 560C-8A vs. standard HBE) and regional configurations. The data above is aggregated from official manufacturer specs and auction listings

Contact us today to arrange a full inspection and detailed equipment demonstration.