Liwweren mat de Minimum Notzungskäschteléisungen

10 JOER Fabrikatioun Erfahrung, Déi Gréissten Remanufacture a China, Ganzen Verkaf vun Ersatzdeeler, Cloud Service

1, INVENTARIS 2, Original Power 3, Einfach zouverlässeg 4, extrem bezuelbar Méi gewuer >>>

all Kategorie

Tower Crane

Du bass hei : Home>Neie Verkaf>Tower Crane

Iwwert ons

Teila gouf am 2010 gegrënnt, ass en héije Standardtechnologie a gréisste Betonmaschinnausrüstungsliwwerer a China. Teila konzentréiert sech op d'Entwécklung vu Baumaschinnen a schwéiere Maschinnen, Occasiounsmaschinnen......

[Weiderliesen]

p16
p 16a
p16
p 16a

Hammerhead Tower Crane

Kuerz Beschreiwung:
1. Tower Crane steel is high quality raw material;
2. SCHNEIDER electrical components ensure reliable and safe mechanism of JinKui tower crane;
3. Cast steel brake wheel, hoisting mechanism is tested in multi-ways;
4. Stable and powering slewing mechanism adopts winding motor and hydraulic transmission.


Spezifikatioune



Max.rated torue(KN.m)Twofold rate3050310031503200160012501000
Fourfold rate2800285029002950
Max.lifting load(t)Twofold rate810.08.0
Fourfold rate16
Max.working amplitude(m)70656055656055
Independent Height(m)onofhängeg48505045
AgehalenTwofold rate183180
Fourfold rate93
Max.lifting capacity at jib tip(t)2.41.81.01.5
Hoisting Speed(m/min)a = 20-600-3080/4050/25
a = 40-300-15
Trolleying Speed0-6558.629.38.79
Swiveling Speed0-0.70.60.650.630.62
Climbing Speed0.40.4
Upper chord lifting beam100×10 Buckle
100×8 Buckle
100×10 Buckle
90×8 Buckle
80×8 Buckle
Lower chord lifting beam100×10 Buckle
100×8 Buckle
80×6 Buckle
100×10 Buckle
90×8 Buckle
100×12 Buckle
Standard section dimensions(mm)2000×2000×3000 Chip type1833 × 1833 × 2500
Passende MotorWinding motor,raising pressure and
speed  regulation,eddy-current braking
Winding motor,raising pressure and speed
regulation,eddy-current braking
Material of section mast200×24 Buckle
200×20 Buckle
125×14 Buckle
125×12 Buckle
Erector beam size(mm)1675 × 17101360/1100

Max.rated torue(KN.m)800630500
Max.lifting load(t)864
Max.working amplitude(m)60,55,56,5050,48,47,42
Independent Height(m)onofhängeg45413029
Agehalen120/150120
Max.lifting capacity at jib tip(t)1.3,1.0,1.31.0,1.0,0.8,0.8,0.8,0.8
Hoisting Speed(m/min)a = 280/40/1075/35/8
a = 440/20/535/17.5/4
Trolleying Speed43.3/21.944/2233/22
Swiveling Speed0.620.62
Climbing Speed0.40.4
Upper chord lifting beam80×8 Buckle
80×7 Buckle
Ф89×8 Ф89×6 Ф89×5
Lower chord lifting beam100×8 Buckle
90×8 Buckle
80×8 Buckle
75×6 Buckle
□80×8
□80×6
□70×5
Standard section dimensions(mm)1833 × 1833 × 2500
1615 × 1615 × 2500
1600 × 1600 × 2800
1615 × 1615 × 2500
1494 × 1494 × 2200
Passende MotorMotors of winding,three-speed and two speed
Material of section mast□135×12
□135×10
125×10 Buckle
160 × 14
160 × 12
140 × 12
Erector beam size(mm)1360 × 1220
1220 × 1000
1220 × 10001043 × 900

5678

Ëmfro
Zesummenhang Product