EN 
ES
RU
PT
SV
DE
TR
FR私たちに関しては
ハンマーヘッドタワークレーン
簡単な説明：
1. Tower Crane steel is high quality raw material;
2. SCHNEIDER electrical components ensure reliable and safe mechanism of JinKui tower crane;
3. Cast steel brake wheel, hoisting mechanism is tested in multi-ways;
4. Stable and powering slewing mechanism adopts winding motor and hydraulic transmission.
【仕様】
| Max.rated torue(KN.m) | Twofold rate | 3050 | 3100 | 3150 | 3200 | 1600 | 1250 | 1000 | ||
| Fourfold rate | 2800 | 2850 | 2900 | 2950 | ||||||
| Max.lifting load(t) | Twofold rate | 8 | 10.0 | 8.0 | ||||||
| Fourfold rate | 16 | |||||||||
| Max.working amplitude(m) | 70 | 65 | 60 | 55 | 65 | 60 | 55 | |||
| Independent Height(m) | 独立した | 48 | 50 | 50 | 45 | |||||
| 付着した | Twofold rate | 183 | 180 | |||||||
| Fourfold rate | 93 | |||||||||
| Max.lifting capacity at jib tip(t) | 2.4 | 1.8 | 1.0 | 1.5 | ||||||
| Hoisting Speed(m/min) | a = 2 | 0-60 | 0-30 | 80 / 40 | 50 / 25 | |||||
| a = 4 | 0-30 | 0-15 | ||||||||
| Trolleying Speed | 0-65 | 58.6 | 29.3 | 8.79 | ||||||
| Swiveling Speed | 0-0.7 | 0.6 | 0.65 | 0.63 | 0.62 | |||||
| 上昇速度 | 0.4 | 0.4 | ||||||||
| Upper chord lifting beam | ∠100×10 Buckle ∠100×8 Buckle | ∠100×10 Buckle ∠90×8 Buckle ∠80×8 Buckle | ||||||||
| Lower chord lifting beam | ∠100×10 Buckle ∠100×8 Buckle ∠80×6 Buckle | ∠100×10 Buckle ∠90×8 Buckle ∠100×12 Buckle | ||||||||
| Standard section dimensions(mm) | 2000×2000×3000 Chip type | 1833 1833××2500 | ||||||||
| マッチングモーター | Winding motor,raising pressure and speed regulation,eddy-current braking | Winding motor,raising pressure and speed regulation,eddy-current braking | ||||||||
| Material of section mast | ∠200×24 Buckle ∠200×20 Buckle | ∠125×14 Buckle ∠125×12 Buckle | ||||||||
| Erector beam size(mm) | 1675x1710 | 1360 / 1100 | ||||||||
| Max.rated torue(KN.m) | 800 | 630 | 500 | ||
| Max.lifting load(t) | 8 | 6 | 4 | ||
| Max.working amplitude(m) | 60、55、56、50 | 50、48、47、42 | |||
| Independent Height(m) | 独立した | 45 | 41 | 30 | 29 |
| 付着した | 120 / 150 | 120 | |||
| Max.lifting capacity at jib tip(t) | 1.3、1.0、1.3 | 1.0、1.0、0.8、0.8、0.8、0.8 | |||
| Hoisting Speed(m/min) | a = 2 | 80/ 40/ 10 | 75/ 35/ 8 | ||
| a = 4 | 40/ 20/ 5 | 35/ 17.5/ 4 | |||
| Trolleying Speed | 43.3 / 21.9 | 44 / 22 | 33 / 22 | ||
| Swiveling Speed | 0.62 | 0.62 | |||
| 上昇速度 | 0.4 | 0.4 | |||
| Upper chord lifting beam | ∠80×8 Buckle ∠80×7 Buckle | Ф89×8 Ф89×6 Ф89×5 | |||
| Lower chord lifting beam | ∠100×8 Buckle ∠90×8 Buckle ∠80×8 Buckle ∠75×6 Buckle | □80×8 □80×6 □70×5 | |||
| Standard section dimensions(mm) | 1833 1833××2500 1615 1615××2500 1600 1600××2800 | 1615 1615××2500 1494 1494××2200 | |||
| マッチングモーター | Motors of winding,three-speed and two speed | ||||
| Material of section mast | □135×12 □135×10 ∠125×10 Buckle | ∠160x14 ∠160x12 ∠140x12 | |||
| Erector beam size(mm) | 1360x1220 1220x1000 | 1220x1000 | 1043x900 | ||
