EN 
ES
RU
PT
SV
DE
TR
FRSobre Nosaltres
Teila es va establir el 2010, és una tecnologia d'alt nivell i el millor proveïdor d'equips de maquinària de formigó a la Xina. Teila se centra en el desenvolupament de maquinària de construcció en maquinària pesada, maquinària usada......
[Llegeix més]Casos globals
-
Els clients de Cambodja van visitar la base líder de bombes de formigó de Hunan Teila
-
Els clients de Dominica van visitar Hunan Teila Heavy Industry Machinery Service Co., Ltd.
-
Del 2 al 4 de novembre de 2016, els clients de l'Equador van visitar Hunan Teila
-
La formigonera amb bomba va ser lliurada al nostre client peruà
-
La bomba de formigó Putzmeister de 36 metres s'ha exportat amb èxit a Amèrica del Sud
Grua torre Hammerhead
Breu descripció:
1. Tower Crane steel is high quality raw material;
2. SCHNEIDER electrical components ensure reliable and safe mechanism of JinKui tower crane;
3. Cast steel brake wheel, hoisting mechanism is tested in multi-ways;
4. Stable and powering slewing mechanism adopts winding motor and hydraulic transmission.
Especificacions
| Max.rated torue(KN.m) | Twofold rate | 3050 | 3100 | 3150 | 3200 | 1600 | 1250 | 1000 | ||
| Fourfold rate | 2800 | 2850 | 2900 | 2950 | ||||||
| Max.lifting load(t) | Twofold rate | 8 | 10.0 | 8.0 | ||||||
| Fourfold rate | 16 | |||||||||
| Max.working amplitude(m) | 70 | 65 | 60 | 55 | 65 | 60 | 55 | |||
| Independent Height(m) | Independent | 48 | 50 | 50 | 45 | |||||
| Adherit | Twofold rate | 183 | 180 | |||||||
| Fourfold rate | 93 | |||||||||
| Max.lifting capacity at jib tip(t) | 2.4 | 1.8 | 1.0 | 1.5 | ||||||
| Hoisting Speed(m/min) | a = 2 | 0-60 | 0-30 | 80/40 | 50/25 | |||||
| a = 4 | 0-30 | 0-15 | ||||||||
| Trolleying Speed | 0-65 | 58.6 | 29.3 | 8.79 | ||||||
| Swiveling Speed | 0-0.7 | 0.6 | 0.65 | 0.63 | 0.62 | |||||
| Climbing Speed | 0.4 | 0.4 | ||||||||
| Upper chord lifting beam | ∠100×10 Buckle ∠100×8 Buckle | ∠100×10 Buckle ∠90×8 Buckle ∠80×8 Buckle | ||||||||
| Lower chord lifting beam | ∠100×10 Buckle ∠100×8 Buckle ∠80×6 Buckle | ∠100×10 Buckle ∠90×8 Buckle ∠100×12 Buckle | ||||||||
| Standard section dimensions(mm) | 2000×2000×3000 Chip type | 1833 × 1833 × 2500 | ||||||||
| Motor a joc | Winding motor,raising pressure and speed regulation,eddy-current braking | Winding motor,raising pressure and speed regulation,eddy-current braking | ||||||||
| Material of section mast | ∠200×24 Buckle ∠200×20 Buckle | ∠125×14 Buckle ∠125×12 Buckle | ||||||||
| Erector beam size(mm) | 1675 × 1710 | 1360/1100 | ||||||||
| Max.rated torue(KN.m) | 800 | 630 | 500 | ||
| Max.lifting load(t) | 8 | 6 | 4 | ||
| Max.working amplitude(m) | 60,55,56,50 | 50,48,47,42 | |||
| Independent Height(m) | Independent | 45 | 41 | 30 | 29 |
| Adherit | 120/150 | 120 | |||
| Max.lifting capacity at jib tip(t) | 1.3,1.0,1.3 | 1.0,1.0,0.8,0.8,0.8,0.8 | |||
| Hoisting Speed(m/min) | a = 2 | 80/40/10 | 75/35/8 | ||
| a = 4 | 40/20/5 | 35/17.5/4 | |||
| Trolleying Speed | 43.3/21.9 | 44/22 | 33/22 | ||
| Swiveling Speed | 0.62 | 0.62 | |||
| Climbing Speed | 0.4 | 0.4 | |||
| Upper chord lifting beam | ∠80×8 Buckle ∠80×7 Buckle | Ф89×8 Ф89×6 Ф89×5 | |||
| Lower chord lifting beam | ∠100×8 Buckle ∠90×8 Buckle ∠80×8 Buckle ∠75×6 Buckle | □80×8 □80×6 □70×5 | |||
| Standard section dimensions(mm) | 1833 × 1833 × 2500 1615 × 1615 × 2500 1600 × 1600 × 2800 | 1615 × 1615 × 2500 1494 × 1494 × 2200 | |||
| Motor a joc | Motors of winding,three-speed and two speed | ||||
| Material of section mast | □135×12 □135×10 ∠125×10 Buckle | ∠160 × 14 ∠160 × 12 ∠140 × 12 | |||
| Erector beam size(mm) | 1360 × 1220 1220 × 1000 | 1220 × 1000 | 1043 × 900 | ||
